Archive for the ‘ISO 17712’ Category
PAS 17712
PAS 17712 means Publicly Available Specification. They work hand in hand with ISO
Click Here For Affordable High Security Bolt Seals
The ISO/PAS 17712 creates new procedures for the classification of mechanical seal types and requirements and also the acceptance and withdrawal of acceptance of mechanical freight container seals.
Click Here for the best prices and selection of Security Seals
Because of the demand, the new document has been issued as an ISO/PAS for clarification and guidance for security seals on freight containers. This is based on material developed by the World Customs Organization, National Customs Organizations and National Testing Bodies.
The International Standards Organization permits its technical committees to draft and vote on Publicly Available Specifications as a kind of interim international standard. The PAS 17712 has a limited shelf life but it is faster to approve than a formal standard.
It was in the year 2003 when the original ISO/PAS 17712 was published. It was developed by a working group of users and manufacturers assembled by the International Standards Organization Technical Committee 104, freight containers.
The ISO/PAS 17712 focuses on the three levels of seal strength, which are indicative, security and high security. The durability of a seal was measured with tests based on impact, shear, bend and tensile strength. The values, measures of strength, then reflected numbers in use by major customs authorities.
The US Customs-Trade Partnership Against Terrorism program and the World Customs Organization’s Framework of standard promote the use of PAS 17712 compliant seals. The seals that are used in International trade improved with this standard.
Nowadays, it became very obvious that security related practices were as important as the physical strength of a seal, whether it is immature management practices or misuse. Seal manufacturers and distributors are responsible for cargo before it is shipped out.
Two important features of the PAS 17712
* The seals must show their mark whether H for high security, S for security and I for indicative.
* ISO compliant seals can only come from compliant sources and only the manufacturers certified as compliant with the normative annex can place a grade marks on seals.
Click Here For Affordable High Security Cable Seals
General Basic Requirements for Seals:
* It must be strong and durable against weather, chemical action and undetectable tampering.
* It should be easy to apply and seal.
* It must be permanently and uniquely marked and numbered.
* The manufacturer’s logo should be easily noticed.
How does ISO/PAS 17712 affect users?
The PAS 17712 affects users for all types of security seals. Due to enhanced customs security requirements, market focus is concentrated on seals classed as high security (bolt or cable seal).
The suppliers must be sure that their product and procedures conform to the requirements and able to produce the important certificates of compliance on request.
And to the buyers, they need to be vigilant with their purchasing. They must obtain evidence that the chosen product passes both the performance test and manufacturer’s internal procedures to comply with the standard and independently audited to that effect.
The Customs and Border Protection issued a notice in the Federal Register that all loaded containers shippers and importers entering the United States starting October 15, 2008 are required to be sealed with a seal meeting the PAS 17712 standard.
Click Here for the best prices and selection of Security Seals
Posted in ISO 17712
ISO 17712
What does ISO 17712 stand for?
Click Here For Affordable High Security Bolt Seals
ISO means International Standards Organization. The ISO 17712 regulation applies to shipping containers. It is an international standard, which is recognized to measure the performance of security seals in any application. ISO 17712 has 3 categories of mechanical security seals, these are high security, security and indicative.
Click Here for the best prices and selection of Security Seals
The strongest type of seal under ISO 17712 is the high security seal. It gives the most protection for shipments and it is designed to discourage intruders. This was made to make it difficult to gain access to high risk and high value shipments. This seal requires heavy-duty bolt or cable cutters for removal.
The security seal is in the middle ground. It shows whether a certain application has been tampered. It is stronger than a indicative seal but provides limited resistance. A security seal is commonly used when a stronger seal is required than a indicative seal. Use cable cutters or lightweight tools for removal.
Last is the indicative seal and it is the simplest type of seal. It shows whether a certain application has been tampered with but it doesn’t prevent someone to access the cargo. This is used for low-risk applications. It can be pulled apart by hand or cut with a simple shear or snipping tool.
The International Standards Organization (ISO) allows its committees to vote on Publicly Available Specifications (PAS). A Publicly Available Specifications is faster in approving than a formal standard but it has a limited shelf life
.
The original ISO 17712 was published in 2003. It was developed by a working group of users and manufacturers assembled by the ISO technical committee. This was focused on the physical parameters of indicative, security and high security. The strength of a seal is measured with tests based on impact, bend and tensile strength. The values reflected are the numbers in use by major customs authorities.
The United States C TPAT and World Customs Organization’s Framework of Standards encouraged the use of ISO 17712 compliant seals that are used in international trade. However, it was agreed that security related practices were as important as the physical strength of a seal, whether through misuse, the seal manufacturers and distributors could effectively control the security of a seal before shipping that seal out of the door.
The working group, who was assembled by the ISO Technical Committee, produced a “normative annex” for security related management practices. This normative annex requires certification after the inspection of the reviewer. The technical Committee approved the revision and the International Standards Organization published it as ISO 17712 2006.
Click Here For Affordable High Security Cable Seals
The two important features of ISO 17712 2006 seals must show a mark indicating their grade, H for high security, S for security and I for indicative. The manufacturers certified as a compliant with the normative annexe may put grade marks on seals. ISO compliant seals can only come from ISO compliant sources.
How does ISO 17712 affect users?
The ISO 17712 affects users for all types of security seals. Due to enhanced customs security requirements, market focus is concentrated on seals classed as high security (bolt or cable seal).
The suppliers must be sure that their product and procedures conform to the requirements and are able to produce the important certificates of compliance on request.
And to the buyers, they need to be vigilant with their purchasing. They must obtain evidence that the chosen product passes both the performance test and manufacturer’s internal procedures comply with the standard and that the manufacturer is independently audited to that effect.
Click Here for the best prices and selection of Security Seals
Posted in ISO 17712
ISO PAS 17712 2006 Freight Containers – Mechanical Seals
Click Here For Affordable High Security Bolt Seals
ISO means International Organization for Standardization and it issued the ISO PAS 17712 2006 Freight Containers – Mechanical Seals. It is an organization formed by merging several groups from different parts of the world. ISO is a network of national standards institutes with a Central Secretariat in Geneva, Switzerland, that coordinates the system.
Click Here for the best prices and selection of Security Seals
It is the world’s largest developer and publisher of International Standards. It aims for the development of standardization with a view to facilitate the international exchange of goods and services and develop cooperation in different aspects. It promotes the smooth and equitable growth of international trade. International Organization for Standardization forms a bridge between the public and private sectors. The result of this federation is an international agreement to publish the international standards.
ISO published a new edition that will help the authorities fight security challenges. This is ISO PAS 17712 : 2006 which replaces the first edition ISO PAS 17712 : 2003, it is strictly about freight container and mechanical seals. Technical committee ISO/TC 104, Freight containers, prepared it. It costs 78 Swiss francs and can be purchased online, at ISO national member institutes, or from ISO Central Secretariat.
The purpose of mechanical seals is to ensure the container doors are locked. As part of a security system it identifies if a freight container has been tampered with or has had unauthorized entry into the container through its doors.
PAS means Publicly Available Specification; they create a procedure for classification for mechanical freight container seals which contains important details about quality control and the role of the manufacturers in the life of a freight container seal which includes the following:
* Design processes.
* Manufacturer’s best practices.
* Distributor and reseller best practices.
* User knowledge and discipline.
* In-transit management.
* After-life (data maintenance on seal production sales and identification numbers).
Mr. Bohlman, the chair of the ISO technical committee, said that this new edition (ISO PAS 17712) ensures global prevention from theft, copying or fraud during manufacture and distribution.
The expectation of this standard is that it will benefit the container and seal manufacturers who deal with theft of goods and vehicles, illegal immigration, transport of dangerous goods and contraband smuggling and other security challenges.
ISO PAS 17712 provides information on mechanical seals that is acceptable for securing freight containers in international commerce.
This is recommended for organizations like, World Custom Organization, International Maritime Organization, International Labor Organization and more.
Click Here For Affordable High Security Cable Seals
ISO PAS 17712 plays an important part in the transportation industry as the exporters and importers use ISO standards. Its system includes standards covering engineering, design, production, testing, and manufacturing. The group rendered a service which includes the complete English translations of its standards and its recommendations are composed of thousands of documents.
Every individual can have an ISO standard available as individual documents and online subscriptions.
For online subscription, just access search, view, bookmark, track and print documents, which are updated. Multiple users can share a single license. They can also access through IHS standards bibliographic data for more than a million documents.
ISO PAS 17712 for mechanical seals enables an agreement in judgment to be reached on solutions that meet both the requirements of business and the broader needs of society.
Click Here for the best prices and selection of Security Seals
Posted in ISO 17712